SLS on the World Wide Web

72mm DDA Locks

SLS offer a full range of mortice locks to suit various applications and where new build and DDA regulations are concerned, it has become commonplace to use 72mm locks as the standard for these installations. These DIN style lock cases also have the added bonus of being universally sized so that doors can be delivered to site, pre morticed to suit the lock case which saves time and money on installation and helps produce a superior architectural finish.

Below is the standard range of DDA locks that SLS can offer. If you have any special requirements then please don't hesitate to contact us.

	Mortice Nightlatch Case - Galvanized Steel Latchbolt - Brass Zinc Plated and Reversible Follower - Brass, to suit 8mm spindle Springing - To suit sprung or unsprung levers (please specify) Operation - Latchbolt withdrawn by lever handle or cylinder. Anti-thrust deadlocks latchbolt. Forend - Stainless Steel, Polished or Satin Brass, Satin or BMA Square or Radius (please specify) Strike Plate - Finish to match forend Options - Key holdback for latchbolt Testing - EN179 and CE Marked. Backset (A) - 60mm, 80mm, 100mm Case Depth (B) - 90mm, 110mm, 120mm
	Mortice Escape Lock Case - Galvanized Steel Latchbolt - Brass Zinc Plated and Reversible Deadbolt - Brass Zinc Plated Follower - Brass, to suit 8mm spindle Springing - To suit sprung or unsprung levers (please specify) Operation - Deadbolt operated by cylinder. Both latch and deadbolt withdrawn by lever. Forend - Stainless Steel, Polished or Satin Brass, Satin or BMA Square or Radius (please specify) Strike Plate - Finish to match forend Options - Split follower locks are handed. Testing - EN179 and CE Marked. Backset (A) - 60mm, 80mm, 100mm Case Depth (B) - 90mm, 110mm, 120mm
	Mortice Sashlock Case - Galvanized Steel Latchbolt - Brass Zinc Plated and Reversible Deadbolt - Brass Zinc Plated Follower - Brass, to suit 8mm spindle Springing - To suit sprung or unsprung levers (please specify). 100mm Case can be supplied for knobs. Operation - Deadbolt operated by cylinder. Lever handle or knob operates latchbolt. Forend - Stainless Steel, Polished or Satin Brass, Satin or BMA Square or Radius (please specify) Strike Plate - Finish to match forend Testing - Conforms to EN 12209-2003, Certifire CF 406. Backset (A) - 60mm, 80mm, 100mm Case Depth (B) - 90mm, 110mm, 120mm
	Mortice Deadlock Case - Galvanized Steel Deadbolt - Brass Zinc Plated Operation - Deadbolt operated by cylinder. Forend - Stainless Steel, Polished or Satin Brass, Satin or BMA Square or Radius (please specify) Strike Plate - Finish to match forend Testing - Conforms to EN 12209-2003, Certifire CF 406. Backset (A) - 60mm, 80mm, 100mm Case Depth (B) - 90mm, 110mm, 120mm
	Mortice Latch Case - Galvanized Steel Latchbolt - Brass Zinc Plated and Reversible Follower - Brass, to suit 8mm spindle Springing - To suit sprung or unsprung levers (please specify). 100mm Case can be supplied to suit knobs. Operation - Latchbolt withdrawn by lever handle. Forend - Stainless Steel, Polished or Satin Brass, Satin or BMA Square or Radius (please specify) Strike Plate - Finish to match forend Options - Key holdback for latchbolt Testing - Conforms to EN 12209-2003, Certifire CF 406. Backset (A) - 60mm, 80mm, 100mm Case Depth (B) - 90mm, 110mm, 120mm
	Mortice Bathroom Lock Case - Galvanized Steel Latchbolt - Brass Zinc Plated and Reversible Deadbolt - Brass Zinc Plated Follower - Brass, to suit 8mm spindle for both latch and deadbolt Springing - To suit sprung or unsprung levers (please specify). 100mm Case can be supplied for knobs. Forend - Stainless Steel, Polished or Satin Brass, Satin or BMA Square or Radius (please specify) Strike Plate - Finish to match forend Backset (A) - 60mm, 80mm, 100mm Case Depth (B) - 90mm, 110mm, 120mm